STUDY OF HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF R134A IN MICROTUBE CONDENSER.

R. Vinoth*1 , R. Satya Meher2 & M. Parthiban3

EVALUATION OF MECHANICAL PROPERTIES OF ROYAL PALM FIBER AND TODDY PALM FIBER REINFORCED POLYMER COMPOSITES.

Ch. Kamprasad*1 , K. Praveen Kumar2 & M. Gopi Krishna3

DESIGNING AND MODELLING OF AN AUTONOMOUS ROBOT FOR CLEANING LAKE SURFACE.

Keerthi Shravani N* 1 , K T Ujwal Pratap Krishna2 & Shri.B.V.S.Rao3

PERFORMANCE AND EMISSION CHARACTERISTICS OF DI-CI ENGINE FUELED WITH METHANOL BLENDED DIESEL FUEL.

K B Mutyalu*1 & V C Das2

COMPARATIVE PERFORMANCE EVALUATION OF STEPPED AND STEPLESS DRIVE IN TURNING.

P.V.Gopalkrishna* 1 , K. Kishore2 & K. Srinivasa Rao3

ENHANCING PRODUCTIVITY THROUGH SIX SIGMA IN MANUFACTURING INDUSTRIES.

Bvs Rao* 1& A.Divya Bharathi2

PROTON EXCHANGE MEMBRANE FUEL CELL COMPONENTS FOR SINGLE CELL ASSEMBLY, TESTING AND ITS APPLICATIONS AS ALTERNATIVE POWER SOURCE.

Syed Aslam*1 , Md. Masood2 & Sudheer Prem Kumar3

DESIGN AND ANALYSIS OF AUTOMATIC LIFTING AND PLACING MACHINE.

J.Anjaneyulu*1 , K. Srinivasa Rao2 & Mr. K. Jeevan Reddy3

PERFORMANCE CHARACTERISTICS OF DIESEL ENGINE FUELED WITH SUNFLOWER OIL METHYL ESTER AND CEO2 NANOPARTICLES.

K. Ratna Kumari*1 , A. Raji Reddy2 & M. Vidya Sagar3

EFFECT OF CHORD LENGTH OF A LOW SOLIDITY VANED DIFFUSER ON THE PERFORMANCE OF A CENTRIFUGAL COMPRESSOR STAGE.

Venkateswara Rao Pothuri*1 , Venkata Ramana Murty G2 , B. Amogh3 & C. Pradeep Reddy4

EFFECT OF MELT AND HEAT-TREATMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AL-SI-MG CAST ALLOYSGRAPHITE MOULD VIBRATING.

Ravinaik Banoth*1 , K.Harinarayana2 & K.Srinivasa Reddy 3

THEORETICAL ANALYSIS OF LOAD CARRYING CAPACITY IN A SHORT SQUEEZE FILM BEARING OPERATING WITH NANOFLUIDS.

G. Jaya Chandra Reddy*1 & K. Hari Narayana2

SCRAMJET INLET DESIGN USING GENETIC ALGORITHMS.

Venkat Rao* 1 , S. N. Omkar2 & Umashankar3

HIGH LEVEL SECURITY SYSTEM FOR OPENING THE DOOR USING MEMS TECHNOLOGY.

P.V. Prasad Reddy*1 , N. Vijaya Rami Reddy2 , K Sudhakar Reddy3 & S Madhava Reddy4

WEAR BEHAVIOUR ANALYSIS & MICROSTRUCTURE OF AISI440 STEEL BY TEMPERING PROCESS: A REVIEW.

K. Lokesh* 1 , A. Anitha Lakshmi2 & Ram Subbiah3

EXPERIMENTAL ANALYSIS OF FORCED CONVECTIVE HEAT TRANSFER IN A PIN-FIN.

E. Sammaiah*1, Md. Mohinoddin2 , Narsimhulu Sanke3 & G. Aditya Bharadwaj4

EFFECT OF LOW THERMAL CONDUCTIVITY MATERIALS ON PERFORMANCE OF COMPRESSION IGNITION ENGINE- A REVIEW AND EXPERIMENTATION.

Chirra Kesava Reddy*1 , M.V.S. Murali Krishna2 , K. Sudhakar Reddy3 , M. Harinatha Reddy4 & A. Nagendra5

MODIFICATION OF AISI 347 STAINLESS STEEL SURFACE BY THE LOW TEMPERATURE SALT BATH NITRIDING PROCESS: A REVIEW.

Ch. Naveen* 1 , Ch. Bandhavi2 & Dr. Ram Subbiah3

ANALYSIS OF DEEP GROOVE BALL BEARINGS USING ANSYS.

V. V. Kondaiah*1 , Ravi Kumar Panthangi2 & K. Srinivas Rao3

MOTION ANALYSIS OF PISTON WITH VARIATION OF PRESSURE OF HYDRAULIC OIL USING H-SIMULATOR.

J Pavan kumar1 , K Ankamma Rao* 2 , K Sudhakar Reddy3 & S Madhava Reddy4

COMPARATIVE STUDY OF WEAR BEHAVIOUR ON AL-2014 ALLOY COATED WITH THERMAL SPRAY HVOF (HIGH VELOCITY OXYGEN FUEL) AND PLASMA SPRAY METHODS – A REVIEW.

A. Arun* 1 , K.Satyanarayana2 & Ram Subbiah2

OPTIMIZATION OF PROCESS PARAMETERS OF AN ENGINE RADIATOR USING TAGUCHI METHOD.

K.P.V. Krishna Varma* 1 , N. Chakravarthi2 & M. Raj Kumar Nayak3

INVESTIGATION OF WEAR PROPERTIES ON AISI D2 - TOOL STEEL BY VARIOUS HEAT TREATMENT PROCESS - A REVIEW.

MD Rahel*1 , K. Siva Satya Mohan2 & Ram Subbiah3

MACHINING CHARACTERISTICS ON SURFACE ROUGHNESS OF (MgO) REINFORCED IN (AL-7075) MMC’S.

P. Chinna Sreenivas Rao* 1 , P. Ravikanth Raju2 , M. Harish3 & S. Upendar4

NURBS FINITE ELEMENT APPROACH FOR ONE DIMENSIONAL BOUNDARY VALUE PROBLEMS.

Ch. Yella Reddy

STRUCTURAL AND THERMAL ANALYSIS OF PRESSURE VESSEL.

N. Chakravarthi*1 & Shaik Rifshu Hussain2

STRUCTURAL AND MODEL ANALYSIS OF A HEAVY VEHICLE CHASSIS FOR VIBRATION SUPRESSION.

G. Madhu*1 & Naveen Reddy Pothula2

INVESTIGATION ON PERFORMANCE OF SHELL AND TUBE HEAT EXCHANGER WITH ASSORTED BAFFLE PARAMETERS.

K. Srinivasulu

INVESTIGATIONS ON MECHANICAL PROPERTIES OF ADVANCED COMPOSITE FOR AEROSPACE APPLICATIONS.

Naveen Reddy Pothula* 1 & G. Madhu2

INFLUENCE OF DIFFERENT ELECTRODES MATERIAL ON MRR OF EDM OF DIE STEEL.

B. Srinivasa Varma1 , Santosh Kulkarni2 & Somvir Singh Nain*3

EXPERIMENTAL INVESTIGATION TO OPTIMIZE PARAMETERS OF REVERSE ENGINEERING TECHNOLOGY FOR RECONSTRUCTING FREE FORM SURFACES.

Boshalla Narsaiah

LINEAR-BUCKLING ANALYSIS OF CYLLINDRICAL SHELLS SUBJECTED TO EXTERNAL PRESSURE.

Sai Kumar Anisetti

NO FAULT FORWARD OF RANGE COUNTER SHAFT SUB ASSEMBLY.

S.Sowmya1 & P.V.Gopalkrishna*

DETERMINATION OF CAPILLARY TUBE SIZING IN VAPOUR COMPRESSION REFRIGERATION SYSTEM FORDIFFERENT REFRIGERANTS.

K. Srinivasa Reddy*1 , A Saibhargav2 , V. Mukesh Reddy3

DEVELOPMENT OF LATENT THERMAL ENERGY STORAGE SYSTEM FOR COOLING APPLICATIONS.

K. Vijay Kumar*1 & P.Threenadh2

MODELLING, ANALYSIS AND FABRICATION OF PARACHUTE AERIAL VEHICLE.

Ch. Neeraja*1, Ch. Divya Bharthi2 & Ravi Kumar3

THERMAL ANALYSIS OF SLOTTED AND DRILLED DISC BRAKE.

Ch. Indira Priyadarsini* 1 , Chirra Keshava Reddy2 & M.V.S. Murali Krishna3

COMPUTATIONAL ANALYSIS ON THE FRICTION STIR WELDING TOOLS WITH VARIOUS PIN PROFILES.

B .Naresh Kumar*1 & Chunchu Sravanthi2

FREE TRANSVERSE VIBRATION ANALYSIS OF UNIFORM SHORT BEAMS.

Yemineni Siva Sankara Rao*1& Kutchibotla Mallikarjuna Rao2

HEAT FLOW ANALYSIS OF CONCENTRIC TUBE PARALLEL FLOW HEAT EXCHANGER WITH HELICAL INTERRUPTER.

G.Shirisha1 , K.Nagender2 & M.Mahesh3

EFFECT OF COOLANT IN COMPACT HEAT EXCHANGER PERFORMANCE-A REVIEW.

Barmavatu Praveen*1 & S. Chakradhar Goud2

EXPERIMENTAL INVESTIGATION OF HEAT ASSISTED MACHINING OF EN8 STEEL USING CARBIDE TIPPED TOOL.

M. Yesu Ratnam* 1 & S.Lavanya2